Sale!

G19 G23 Gen3 Slide Parts Kit for GLOCK 19/23

Original price was: $79.99.Current price is: $49.99.

-38%

This is a slide completion kit for gen3 glock 19.  Works with polymer80 / p80 builds also.  Includes all the small upper parts for your g19 slide (except sights/barrel)

(4 customer reviews)

Tools / Extras

(+$8.00)
(+$9.99)
(+$9.99)
(+$5.99)
(+$3.99)
Product price: $49.99
Order total:
Free shipping on all orders over $350
G19 G23 Gen3 Slide Parts Kit for GLOCK 19/23
G19 G23 Gen3 Slide Parts Kit for GLOCK 19/23 $79.99 Original price was: $79.99.$49.99Current price is: $49.99.

This is a slide completion kit for gen3 glock 19.  Works with polymer80 / p80 builds also.  Includes all the small upper parts for your g19 slide (except sights/barrel)  

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Agency Arms LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Additional information

Weight 0.1 lbs
Dimensions 8.0 × 4.0 × 1.0 in
Model Style

G19, G23

4 reviews for G19 G23 Gen3 Slide Parts Kit for GLOCK 19/23

  1. David Sumpter (verified owner)

    Great kit – An easy to assemble kit that works great with the kit so far. Though one thing I noticed is that to work on a gen 4 lower, a heavier duty spring is needed, about 20 lbs. Past that it works great as intended.

  2. Steven Tumelson (verified owner)

    Good quality – The parts kit was easy to install. The parts are solid with good quality and meet the specifications for the slide, that I also purchased through Mid State Firearms. Now I have two slides for one frame, in different calibers.

  3. David Camper (verified owner)

    Mostly worked. – All the parts fit fine and looked of good quality. However, the supplied extractor would not extract the fired brass. I substituted a stock Glock extractor and everything functioned fine.

  4. Wiley Anderson (verified owner)

    Very nice – Great product as usual from mid state.

Add a review

Your email address will not be published. Required fields are marked *

4.8
Based on 5 reviews
5 star
80
80%
4 star
20
20%
3 star
0%
2 star
0%
1 star
0%
1-5 of 5 reviews
  1. DS

    Great kit – An easy to assemble kit that works great with the kit so far. Though one thing I noticed is that to work on a gen 4 lower, a heavier duty spring is needed, about 20 lbs. Past that it works great as intended.

  2. ST

    Good quality – The parts kit was easy to install. The parts are solid with good quality and meet the specifications for the slide, that I also purchased through Mid State Firearms. Now I have two slides for one frame, in different calibers.

  3. DC

    Mostly worked. – All the parts fit fine and looked of good quality. However, the supplied extractor would not extract the fired brass. I substituted a stock Glock extractor and everything functioned fine.

  4. WA

    Very nice – Great product as usual from mid state.

  5. C

    sound of freedom – This was a great set up. I loved being able to customize the set up. Only issue I had was my own fault as a newb to building these. I used a heavy barrel in a slim hand guard. It makes adding attachments tough with clearances. Hoping someday to also get an AR10 from here.